Getting Started with Sol Brush

How to Prepare Your Brush for Use

Follow these steps to ensure your brush is ready for application.

Step 1: Remove the Netting
- Open the brush cap.
- Take out the netting around the bristles.
Step 2: Protect the Bristles
- Slide the guard back over the brush bristles.
- Put the cap back on.
Step 3: Release Air Pressure
- Tap the brush firmly on a hard surface, like a tabletop, with the cap facing down. Do this about 5 times.
- Ensure the brush is straight up (bristles facing down with the cap on).
- Use enough force to release some air pressure in the brush's filter. You need to bang the brush pretty hard here!
Step 4: Activate the Brush
- Take off the brush cap.
- Slide back the sleeve.
- Run your finger through the bristles so they bend and flick up. You should see a "poof" of powder. This shows the brush is fully activated.
  - Note: If you don't see the "poof" of powder, repeat the steps with a bit more force. The hard force helps the powder push through the filter.

Remember, the brush is gravity-fed. You might need to reload the powder to ensure you have enough to apply.

Storage: Keep your brush in a cool, dry place when not in use.

Need a visual guide? Watch our quick video here: How to Prime Your Sol Brush

Now you’re all set to enjoy your Sol Brush! If you have any questions or need further assistance, feel free to reach out at [email protected].